Simone Herzog Copyright: © IWM

Person

Dr.-Ing.

Simone Herzog

M.Sc.
Chair and Institute for Materials Applications in Mechanical Engineering

Manager Research field Development Tool Materials

Address

Building: 1230

Room: 205

Augustinerbach 4 - 22

52062 Aachen

Contact

WorkPhone
Phone: +49 241 80-96514
 

Publications

Title
Kaletsch, Anke; Radtke, Felix; Herzog, Simone; Köhnen, Patrick; Höges, Simon; Broeckmann, Christoph (2023): Influence of Hot Isostatic Pressing on Microstructure and Tensile Properties of Nickel-Free Stainless Steel for Metal Binder Jetting
In: Applied Sciences, 13, 23, 12676
[DOI: 10.3390/app132312676]
Rudenskiy, Donat; Herzog, Simone; Horbach, Lutz; Gebhardt, Nils Christian; Weber, Felix; Kaletsch, Anke; Broeckmann, Christoph (2023): Numerical Modeling of Residual Stresses and Fracture Strengths of Ba0.5Sr0.5Co0.8Fe0.2O3−δ in Reactive Air Brazed Joints
In: Materials, 16, 23, 7265
[DOI: 10.3390/ma16237265]
Radtke, Felix; Becker, Louis; Herzog, Simone; Lentz, Jonathan; Weber, Sebastian; Broeckmann, Christoph (2023): High nitrogen steels produced by PBF-LB/M - Influence of particle size distribution and process parameterson melting behavior of additivated steel powders
In: LiM 2023 proceedings - Laser Powder Bed Fusion, [1]-8
[DOI: 10.18154/RWTH-2023-10113]
Radtke, Felix; Becker, Louis; Herzog, Simone; Lentz, Jonathan; Weber, Sebastian; Broeckmann, Christoph (2023): High nitrogen steels produced by PBF-LB/M - Process strategy and properties for ceramic additivated metal powders
In: Euro PM2023 Proceedings - EPMA, 2023
[DOI: 10.59499/EP235764243]
Broeckmann, Christoph; Apel, Markus; Herzog, Simone; Rad, Mahdi Torabi; Rudenskiy, Donat; Boussinot, Guillaume; Gebhardt, Nils Christian; Hallstedt, Bengt (2023): Entwicklung einer Methodik für die quantitative Vorhersage der Schädigung in den Diffusionsschichten reaktivgelöteter BSCF-Stahl-Verbunde : Abschlussbericht zum DFG-Projekt Nr. 392944287
[DOI: 10.18154/RWTH-2023-09797]
Köhler, Marie Luise; Norda, Michael; Herzog, Simone; Kaletsch, Anke; Petzoldt, Frank; Broeckmann, Christoph (2023): Towards carbide-rich tool steels in PBF-LB/M: TiC additivation of AISI H13
In: Additive Manufacturing Letters, 6, 100143
[DOI: 10.1016/j.addlet.2023.100143]
Broeckmann, Christoph; Mirz, Markus; Herzog, Simone; Busse, Mattias; Barthel, Bastian; Aumund-Kopp, Claus; Weißgärber, Thomas; Franke-Jurisch, Marie; Deng, Yuanbin; Horenkamp, Kathrin (2023): Abschlusszusammenfassung zum Forschungsprojekt IGF 21074 BG "Maß-HIP-3D"
[DOI: 10.18154/RWTH-2023-07580]
Radtke, Felix; Herzog, Simone; Linnemann, Simon; Andreeva, Ekaterina; Aumund-Kopp, Claus; Broeckmann, Christoph (2023): Binder Jetting as Complementary Technology to Metal Injection Molding?
In: Ceramic applications, 11, 2, 38-43
[DOI: 10.18154/RWTH-2023-07536]
Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2023): Diffusion Barriers Minimizing the Strength Degradation of Reactive Air Brazed Ba0.5Sr0.5Co0.8Fe0.2O3-δ Membranes during Aging
In: Membranes, 13, 5, 504
[DOI: 10.3390/membranes13050504]
Qin, Siyuan; Saewe, Jasmin; Kunz, Johannes; Herzog, Simone; Kaletsch, Anke; Schleifenbaum, Johannes Henrich; Broeckmann, Christoph (2023): Influence of Preheating Temperature on Microstructure Evolution and Hardness of High-Speed Steel AISI M50 Processed by Laser Powder Bed Fusion
In: Steel research international, 94, 6, 2200784
[DOI: 10.1002/srin.202200784]
Qin, Siyuan; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2022): Improving the Fatigue Strength of Laser Powder Bed-Fused AISI M3:2 by Hot Isostatic Pressing
In: Steel research international, 94, 4, 2200435
[DOI: 10.1002/srin.202200435]
Herzog, Simone; Liu, Chao (2023): Rohdaten, ergänzende Berechnungen und Informationen aus der vorgelegten Dissertation von Simone Herzog
[DOI: 10.18154/RWTH-2022-06816]
Busse, Matthias; Aumund-Kopp, Claus; Broeckmann, Christoph; Herzog, Simone; Radtke, Felix; Deng, Yuanbin; Adreeva, Ekaterina (2022): Abschlusszusammenfassung zum Forschungsprojekt IGF 21421 N MBJ Pro
[DOI: 10.18154/RWTH-2024-00882]
Norda, Michael; Köhler, Marie Luise; Herzog, Simone; Broeckmann, Christoph; Petzoldt, Frank (2022): Processing and Corrosion Behaviour Of Metal Powder Blends In LPBF
In: Developing the powder metallurgy future : powder production, consolidation technologies, materials, applications, tools for improving PM : World PM2022 Congress & Exhibition : proceedings : 9-13 October 2022, Lyon Convention Centre, Lyon, France / EPMA - European Powder Metallurgy Association, 8 Seiten
[DOI: 10.18154/RWTH-2024-00877]
Mirz, Markus; Frank-Jurisch, Marie; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2022): A Comparative Study on Different Joining Techniques For PM-HIP Evacuation Tubes
In: Developing the powder metallurgy future : powder production, consolidation technologies, materials, applications, tools for improving PM : World PM2022 Congress & Exhibition : proceedings : 9-13 October 2022, Lyon Convention Centre, Lyon, France / EPMA - European Powder Metallurgy Association, 7 Seiten
[DOI: 10.18154/RWTH-2024-00876]
Herzog, Simone (2022): Festigkeit keramischer sauerstoffionenleitender Membranen und deren reaktivgelöteter Verbunde
[DOI: 10.18154/RWTH-2023-00770]
Köhler, Marie Luise; Radtke, Felix; Norda, Michael; Herzog, Simone; Kaletsch, Anke; Petzoldt, Frank; Broeckmann, Christoph (2022): Resistance against Abrasive Wear and Corrosion of Laser Powder Bed Alloyed High Chromium Tool Steels
In: Steel research international, 94, 4, 2200455
[DOI: 10.1002/srin.202200455]
Klug, Christina; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph; Schmitz, Thomas Heinrich (2022): Forming of Additively Manufactured Ceramics by Magnetic Fields
In: Ceramics, 5, 4, 947-960
[DOI: 10.3390/ceramics5040068]
Herzog, Simone; Liu, Chao; Nauels, Nicolas; Kaletsch, Anke; Broeckmann, Christoph (2022): Failure Mechanisms of Ba0.5Sr0.5Co0.8Fe0.2O3−δ Membranes after Pilot Module Operation
In: Membranes, 12, 11, 1093
[DOI: 10.3390/membranes12111093]
Qin, Siyuan; Bo, Yutao; Herzog, Simone; Hallstedt, Bengt; Kaletsch, Anke; Broeckmann, Christoph (2022): Influence of Process Parameters on Porosity and Hot Cracking of AISI H13 Fabricated by Laser Powder Bed Fusion
In: Powders, 1, 3, 184-193
[DOI: 10.3390/powders1030012]
Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2022): Reduced strength degradation of reactive air brazed Ba0.5Sr0.5Co0.8Fe0.2O3-δ membranes by pre-oxidation of metallic components
In: Materials science and engineering / A, 857, 143993
[DOI: 10.1016/j.msea.2022.143993]
Herzog, Simone; Boussinot, Guillaume; Kaletsch, Anke; Apel, Markus; Broeckmann, Christoph (2022): Microstructure coarsening in Ba0.5Sr0.5Co0.8Fe0.2O3-δ during reactive air brazing
In: Journal of the European Ceramic Society, 42, 13, 5842-5850
[DOI: 10.1016/j.jeurceramsoc.2022.06.084]
Qin, Siyuan; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2022): Improving fatigue strength of laser powder bed fused AISI M3:2 by hot isostatic pressing
In: 12th Tooling Conference &Exhibition - Tooling 2022 : Book of Abstracts. - Monday 25 April 2022 - Wednesday 27 April 2022, Conventum Conference Center, 16, 7-7
Liu, Chao; Herzog, Simone; Deng, Yuanbin; Kaletsch, Anke; Oster, Philip; Broeckmann, Christoph (2022): Influence of laser surface texturing on the flexural strength of Al2O3 and Si3N4
In: Journal of the European Ceramic Society, 42, 10, 4286-4295
[DOI: 10.1016/j.jeurceramsoc.2022.04.013]
Mirz, Markus; Herzog, Simone; Broeckmann, Christoph; Kaletsch, Anke (2022): Influence of the L-PBF Process Atmosphere on the Microstructure and Tensile Properties of AISI 318LN Duplex Stainless Steel
In: Journal of manufacturing and materials processing, 6, 2, 32
[DOI: 10.3390/jmmp6020032]
Köhler, Marie Luise; Radtke, Felix; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2022): Resistance Against Abrasive Wear and Corrosion of a Laser Powder Bed Alloyed High Chromium Tool Steel
In: 12th Tooling Conference & Exhibition - Tooling 2022 : Book of Abstracts. - Monday 25 April 2022 - Wednesday 27 April 2022, Conventum Conference Center, 15-16
Köhler, Marie Luise; Ali, Fawad; Herzog, Simone; Suwanpinij, Piyada; Kaletsch, Anke; Broeckmann, Christoph (2021): Influence of Cr3C2 Additions to AISI H13 Tool Steel in the LPBF Process
In: Steel research international, 93, 1, 2100454
[DOI: 10.1002/srin.202100454]
Kunz, Johannes; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2021): Influence of initial defect density on mechanical properties of AISI H13 hot-work tool steel produced by laser powder bed fusion and hot isostatic pressing
In: Powder metallurgy, 65, 1, 1-12
[DOI: 10.1080/00325899.2021.1934634]
Herzog, Simone; Kaletsch, Anke; Riehm, Sebastian; Andreeva, Ekaterina; Hartwig, Thomas; Broeckmann, Christoph (2021): Binder Jetting as Complementary Technology to Metal Injection Molding: influence of HIP on microstructure and mechanical properties
In: Developing the powder metallurgy future : powder production, consolidation technologies, materials, applications, tools for improving PM : Euro PM 2021 Virtual Congress & Exhibiton : proceedings : 18-22 October 2021, online / EPMA, European Powder Metallurgy Association, 6 Seiten
[DOI: 10.18154/RWTH-2023-11065]
Köhler, Marie Luise; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2021): Influence Of The Powder Particle Size Distribution On The Microstructure Of Laser Powder Bed Alloyed Cold Work Tool Steel
In: Developing the powder metallurgy future : powder production, consolidation technologies, materials, applications, tools for improving PM : Euro PM 2021 Virtual Congress & Exhibiton : proceedings : 18-22 October 2021, online / EPMA, European Powder Metallurgy Association, 7 Seiten
[DOI: 10.18154/RWTH-2023-11064]
Norda, Michael; Köhler, Marie Luise; Herzog, Simone; Broeckmann, Christoph; Petzoldt, Frank (2021): Influence of Powder Properties on the Mixing Behavior of Metal Powders in LPBF
In: Developing the powder metallurgy future : powder production, consolidation technologies, materials, applications, tools for improving PM : Euro PM 2021 Virtual Congress & Exhibiton : proceedings : 18-22 October 2021, online / EPMA, European Powder Metallurgy Association, 6 Seiten
[DOI: 10.18154/RWTH-2023-09907]
Herzog, Simone; Fries, Sofia; Mirz, Markus; Kaletsch, Anke; Broeckmann, Christoph (2021): Vom Pulver zum additiv hergestellten Bauteil - Teil 1: Perspektiven durch heiß-isostatisches Pressen
In: Werkstoffe in der Fertigung, 2021, 1, 35-37
[DOI: 10.18154/RWTH-2023-07575]
Köhler, Marie Luise; Kunz, Johannes; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2021): Vom Pulver zum additiv hergestellten Bauteil - Teil 2: Potenziale durch Pulvermischungen
In: Werkstoffe, 2, 24-26
Kaletsch, Anke; Qin, Siyuan; Riehm, Sebastian; Kunz, Johannes; Herzog, Simone; Broeckmann, Christoph (2021): Synergien in der Pulvermetallurgie - Wie AM und HIP voneinander profitieren
In: Pulvermetallurgie - nachhaltige Lösungen und neue Märkte : Vorträge und Ausstellerbeiträge des Hagener Symposiums am 25. November und 26. November 2021 in Hagen / veranstaltet vom Ausschuss für Pulvermetallurgie, Fachverband Pulvermetallurgie ; Herausgeber: Christoph Broeckmann, Herbert Danninger, Thomas Weißgärber, 79-102
Kaletsch, Anke; Qin, Siyuan; Herzog, Simone; Broeckmann, Christoph (2021): Influence of high initial porosity introduced by laser powder bed fusion on the fatigue strength of Inconel 718 after post-processing with hot isostatic pressing
In: Additive manufacturing, 47, 102331
[DOI: 10.1016/j.addma.2021.102331]
Kunz, Johannes; Köhler, Marie Luise; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2021): Influence of an Increasing Alloying Content on the Microstructure of a High‐Speed Steel in the Laser‐Powder Bed Fusion Process
In: Steel research international, 92, 12, 2100438
[DOI: 10.1002/srin.202100438]
Riehm, Sebastian; Friederici, Vera; Wieland, Sandra; Deng, Yuanbin; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2021): Tailor-made functional composite components using additive manufacturing and hot isostatic pressing
In: Powder metallurgy, 64, 4, 295-307
[DOI: 10.1080/00325899.2021.1901398]
Qin, Siyuan; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2021): Effects of Pressure on Microstructure and Residual Stresses during Hot Isostatic Pressing Post Treatment of AISI M50 Produced by Laser Powder-Bed Fusion
In: Metals : open access journal, 11, 4, 596
[DOI: 10.3390/met11040596]
Köhler, Marie Luise; Kunz, Johannes; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2020): Microstructure analysis of novel LPBF-processed duplex stainless steels correlated to their mechanical and corrosion properties
In: Materials science and engineering / A, 801, 140432
[DOI: 10.1016/j.msea.2020.140432]
Liu, Chao; Aengenheister, Stefan; Herzog, Simone; Deng, Yuanbin; Kaletsch, Anke; Schmitz, Katharina; Broeckmann, Christoph (2020): Application of Weibull theory to laser surface textured Al2O3
In: Journal of the European Ceramic Society, 41, 2, 1415-1426
[DOI: 10.1016/j.jeurceramsoc.2020.10.003]
Köhler, Marie Luise; Kunz, Johannes; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2020): Generation Of A Duplex Steel Microstructure In The LPBF Process
In: Developing the powder metallurgy future : additve manufacturing - functional materials - hard materials and diamond tools - hot isostatic pressing - metal injection moulding - new materials, processes and applications - press and sinter : Euro PM2020 Virtual Congress : proceedings : 5-7 October 2020, online / EMPA - European Powder Metallurgy Association
[DOI: 10.18154/RWTH-2021-06220]
Qin, Siyuan; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2020): Influence Of Post Heat Treatment On Microstructure And Residual Stresses Of AISI M50 Produced By Laser Powder-Bed Fusion
In: Developing the powder metallurgy future : additve manufacturing - functional materials - hard materials and diamond tools - hot isostatic pressing - metal injection moulding - new materials, processes and applications - press and sinter : Euro PM2020 Virtual Congress : proceedings : 5-7 October 2020, online / EMPA - European Powder Metallurgy Association
[DOI: 10.18154/RWTH-2021-06219]
Ehle, Lisa Christine; Richter, Silvia; Herzog, Simone; Broeckmann, Christoph; Mayer, Joachim (2020): Identification of Cu-Co-oxide phases of reactive air brazed Ba$_{0.5}$ Sr$_{0.5}$Co$_{0.8}$Fe$_{0.2}$O$_{3-δ}$-Ag-14CuO joints by EBSD, EPMA and TEM diffraction
In: EMAS 2019 Workshop - 16th European Workshop on Modern Developments and Applications in Microbeam Analysis 19-23 May 2019, Trondheim, Norway
[DOI: 10.1088/1757-899X/891/1/012012]
Herzog, Simone; Andreeva, Ekaterina; Deng, Yuanbin; Hartwig, Thomas; Kaletsch, Anke; Salk, Nathalie; Petzoldt, Frank; Broeckmann, Christoph (2020): Abschlusszusammenfassung zum Forschungsprojekt IGF 19733 N "3DP für MIM"
[DOI: 10.18154/RWTH-2021-01204]
Kunz, Johannes; Boontanom, Autchariya; Herzog, Simone; Suwanpinij, Piyada; Kaletsch, Anke; Broeckmann, Christoph (2020): Influence of hot isostatic pressing post-treatment on the microstructure and mechanical behavior of standard and super duplex stainless steel produced by laser powder bed fusion
In: Materials science and engineering / A, 794, 139806
[DOI: 10.1016/j.msea.2020.139806]
Kunz, Johannes; Saewe, Jasmin; Herzog, Simone; Kaletsch, Anke; Schleifenbaum, Johannes Henrich; Broeckmann, Christoph (2019): Mechanical Properties of High-Speed Steel AISI M50 Produced by Laser Powder Bed Fusion
In: Steel research international, 91, 5, 1900562
[DOI: 10.1002/srin.201900562]
Qin, Siyuan; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2019): Effects of HIP on microstructure and creep properties of Inconel 718 fabricated by laser powder-bed fusion
In: Euro PM 2019 Congress & Exhibition : Euro PM 2019 proceedings : 13-16 October 2019, Maastricht Exhibition & Congress Centre (MECC), Maastricht, The Netherlands / EPMA, European Powder Metallurgy Association
[DOI: 10.18154/RWTH-2022-03976]
Liu, Chao; Aengenheister, Stefan; Herzog, Simone; Deng, Yuanbin; Kaletsch, Anke; Bezold, Alexander; Schmitz, Katharina; Broeckmann, Christoph (2019): Tribological Qualification and Prediction of Fracture Probability of High-Performance Ceramics for Application in Flat Sliding Valves
In: Ceramic applications, 7, 1, 56-62
Schulze-Küppers, Falk; Drago, F.; Ferravante, L.; Herzog, Simone; Baumann, S.; Pinacci, P.; Meulenberg, W. A. (2019): Design and fabrication of large-sized planar oxygen transport membrane components for direct integration in oxy-combustion processes
In: Separation and purification technology, 220, 1 August 2019, 89-101
[DOI: 10.1016/j.seppur.2019.03.052]
Nauels, Nicolas; Herzog, Simone; Modigell, Michael; Broeckmann, Christoph (2018): Membrane module for pilot scale oxygen production
In: Journal of membrane science, 574, 252-261
[DOI: 10.1016/j.memsci.2018.12.061]
Kunz, Johannes; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph; Saewe, Jasmin; Gayer, Christoph; Schleifenbaum, Johannes Henrich (2018): Influence of Powder Bed Temperature on Microstructure and Post Heat Tretment of High Speed Steel AISI M50 Processed by Laser Powder Bed Fusion
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 6 Seiten
[DOI: 10.18154/RWTH-2023-11106]
Herzog, Simone; Deng, Yuanbin; Kaletsch, Anke; Broeckmann, Christoph; Schubert, Thomas; Kathrin, Horenkamp; Huber, Gerhard; Davies, Susan; Marmottant, Ariane; Laurent, Veronique (2018): Inerte Anoden für den Hall-Héroult-Prozess : Entwicklung einer Prozesskette durch heißisostatisches Pressen und Vermeidung diffusionsbedingter Porositätsbildung
In: Giesserei-Praxis, 69, 12, 25-30
Riehm, Sebastian; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph; Friederici, Vera (2018): Herstellung endkonturnaher Verbundbauteile durch die Kombination von additiver Fertigung und heißisostatischem Pressen
In: Fachtagung Werkstoffe und Additive Fertigung : 25.-26.04.2018, Potsdam : Tagungsband ; Eds.: Peter Hoyer ...
Deng, Yuanbin; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph; Horenkamp, Kathrin; Huber, Gerhard; Davies, Susan; Marmottant, Ariane; Laurent, Veronique (2018): DEM and FEM Simulation of Powder Filling and HIP in the Production of HIP-clad Inert Electrodes
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 6 Seiten
[DOI: 10.18154/RWTH-2019-00288]
Riehm, Sebastian; Friederici, Vera; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2018): Tailor-Made Functional Composite Components Using AM and HIP
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 15 Seiten
[DOI: 10.18154/RWTH-2019-00287]
Herzog, Simone; Deng, Yuanbin; Kaletsch, Anke; Broeckmann, Christoph; Schubert, Thomas; Horenkamp, Kathrin; Huber, Gerhard; Davies, Susan; Marmottant, Ariane; Laurent, Veronique (2018): Influence of Carbon Diffusion from a Steel Capsule on the Porosity Formation in a MMC Coating Layer During HIP Cladding
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 6 Seiten
[DOI: 10.18154/RWTH-2019-00286]
Kunz, Johannes; Herzog, Simone; Kaletsch, Anke; Saewe, Jasmin; Gayer, Christoph; Schleifenbaum, Johannes Henrich; Broeckmann, Christoph (2018): Influence Of Powder Bed Temperature On Microstructure And Post Heat Treatment Of High Speed Steel AISI M50 Processed By Laser-Powder Bed Fusion
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association
Deng, Yuanbin; Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph; Marmottant, Ariane; Laurent, Veronique (2017): Numerical Study of Near-Net-Shape Forming under Encapsulation Technologies and HIP Cladding
In: Euro PM2017 Congress & Exhibition : Euro PM2017 proceedings : 1-5 October 2017, Milano Congressi (MiCo), Milan, Italy / EPMA, European Powder Metallurgy Association, 7 Seiten
[DOI: 10.18154/RWTH-2019-00289]
Herzog, Simone; Kaletsch, Anke; Broeckmann, Christoph (2016): Sealing performance of Ag-CuO brazing filler on porous La0.6Sr0.4Co0.2Fe0.8O3-δ applied in an oxygenation membrane module
In: Brazing, high temperature brazing and diffusion bonding : LÖT 2016 : lectures and posters of the 11th international conference taking place in Aachen on 7th to 9th June 2016 / organized by DVS, German Welding Society in kind collaboration with ASM International, Materials Park [und 7 andere]