[Contribution to a book, Contribution to a conference proceedings]
Tailor-Made Net-Shape Composite Components by Combining Additive Manufacturing and Hot Isostatic Pressing
In: Hot Isostatic Pressing - HIP\'17 : 12th International Conference on Hot Isostatic Pressing (HIP\'17), Sydney, Australia, 5-8 December, 2017 / Pranesh Dayal and Gerry Triani [editors], 27, 202-209, 2019
[DOI: 10.21741/9781644900031-27]

Riehm, Sebastian
Kaletsch, Anke
Broeckmann, Christoph
Friederici, Vera
Wieland, Sandra
et al.

[Journal Article]
Membrane module for pilot scale oxygen production
In: Journal of membrane science, 574, 252-261, 2018
[DOI: 10.1016/j.memsci.2018.12.061]

Nauels, Nicolas
Herzog, Simone
Modigell, Michael
Broeckmann, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Formation of White Etching Cracks (WEC) under rolling loading in a two-disc test rig and a kinematic study on a full-scale bearing
In: 73rd Society of Tribologists & Lubrication Engineers Annual Meeting & Exhibition 2018 : Minneapolis, Minnesota, USA, 20-24 May 2018, 378-382, 2018

Gutierrez Guzman, Francisco Gerardo Antonio
Mikitisin, Adrian
Cornel, Daniel
Sous, Christopher
Steinweg, Florian
et al.

[Journal Article]
Tooth-Root loadbearing capacity of surface-densified fe-0.85 wt.% mo powder metallurgical gears
In: International journal of powder metallurgy, 54 (1), 33-45, 2018

Hajeck, Karl Marko
Frech, Tim
Beiss, Paul
Broeckmann, Christoph
Klocke, Fritz
et al.

[Abstract]
Hot isostatic pressing with integrated heat treatment
In: Metal Additive Manufacturing Conference 2018 Wien 2018-11-21 - 2018-11-23, 2018

Thie, Stephanie
Lenz, Wolfgang
Pfeifer, Herbert
Riehm, Sebastian
Deng, Yuanbin
et al.

[Contribution to a book, Contribution to a conference proceedings]
Multiaxial life prediction of hydrodynamic plain bearings
In: 12th International Fatigue Congress (FATIGUE 2018) : Poitiers Futuroscope, France, May 27-June 1st, 2018 / G. Hénaff (ed.), 16001, 2018
[DOI: 10.1051/matecconf/201816516001]

Wünsch, Henrik
Sous, Christopher
Broeckmann, Christoph

[Contribution to a conference proceedings]
FVA 707 IV - Risse auf Lagerringen - Wasserstoffdetektion
In: FVA-Informationstagung : 04. und 05. Dezember 2018 in Würzburg / Forschungsvereinigung Antriebstechnik e.V., 2018

Linzmayer, Martin
Jacobs, Georg
Gutierrez Guzman, Francisco Gerardo Antonio
Sous, Christopher
Steinweg, Florian
et al.

[Contribution to a conference proceedings]
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Plate Preheating System
In: [Metal Additive Manufacturing Conference, MAMC 2018, 2018-11-21 - 2018-11-23, Wien, Austria], 2018

Saewe, Jasmin
Gayer, Christoph
Vogelpoth, Andreas
Kunz, Johannes
Broeckmann, Christoph
et al.

[Conference Presentation]
Precise prediction of near-net-shape HIP components through DEM and FEM modelling
In: 12th International Conference on Hot Isostatic Pressing Sydney 2017-12-05 - 2017-12-08, 24 Folien, 2018

Deng, Yuanbin
Kaletsch, Anke
Bezold, Alexander
Broeckmann, Christoph

[Contribution to a conference proceedings]
Numerical Study of Hot Isostatic Pressing with Integrated Heat Treatment of PM-HIP Cold Work Steel D7
In: [World Congress on Powder Metallurgy, World PM2018, 2018-09-16 - 2018-09-20, Beijing, Peoples R China], 442-453, 2018

Deng, Yuanbin
Birke, Carola
Rajaei, Ali
Broeckmann, Christoph

[Contribution to a conference proceedings]
Improving the Fatigue Strength of L-PBF Manufactured IN718 Samples by HIP Post Processing
In: [World Congress on Powder Metallurgy, World PM2018, 2018-09-16 - 2018-09-20, Beijing, Peoples R China], 1665-1672, 2018

Kaletsch, Anke
Heine, Luisa-Marie
Kunz, Johannes
Bremen, Sebastian
Schleifenbaum, Johannes Henrich
et al.

[Journal Article]
Process Simulation and Prediction of Fracture Probability in Powder Technology
In: Ceramic applications, 6 (1), 58-64, 2018

Deng, Yuanbin
Van Kempen, Stanley
Sistla, Sree Koundinya
Liu, Chao
Kaletsch, Anke
et al.

[Journal Article]
Inerte Anoden für den Hall-Héroult-Prozess : Entwicklung einer Prozesskette durch heißisostatisches Pressen und Vermeidung diffusionsbedingter Porositätsbildung
In: Giesserei-Praxis, 69 (12), 25-30, 2018

Herzog, Simone
Deng, Yuanbin
Kaletsch, Anke
Broeckmann, Christoph
Schubert, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Herstellung endkonturnaher Verbundbauteile durch die Kombination von additiver Fertigung und heißisostatischem Pressen
In: Fachtagung Werkstoffe und Additive Fertigung : 25.-26.04.2018, Potsdam : Tagungsband / DGM, 2018

Riehm, Sebastian
Herzog, Simone
Kaletsch, Anke
Broeckmann, Christoph
Friederici, Vera

[Contribution to a book, Contribution to a conference proceedings]
DEM and FEM Simulation of Powder Filling and HIP in the Production of HIP-clad Inert Electrodes
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Deng, Yuanbin
Herzog, Simone
Kaletsch, Anke
Broeckmann, Christoph
Horenkamp, Kathrin
et al.

[Contribution to a book, Contribution to a conference proceedings]
Tailor-Made Functional Composite Components Using AM and HIP
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 15 Seiten, 2018

Riehm, Sebastian
Friederici, Vera
Herzog, Simone
Kaletsch, Anke
Broeckmann, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Influence of Carbon Diffusion from a Steel Capsule on the Porosity Formation in a MMC Coating Layer During HIP Cladding
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 6 Seiten, 2018

Herzog, Simone
Deng, Yuanbin
Kaletsch, Anke
Broeckmann, Christoph
Schubert, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence Of Powder Bed Temperature On Microstructure And Post Heat Treatment Of High Speed Steel AISI M50 Processed By Laser-Powder Bed Fusion
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Kunz, Johannes
Herzog, Simone
Kaletsch, Anke
Saewe, Jasmin
Gayer, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence of graphite morphology on static and cyclic strength of ferritic nodular cast iron
In: 12th International Fatigue Congress (FATIGUE 2018) : Poitiers Futuroscope, France, May 27-June 1st, 2018 / G. Hénaff (ed.), 14014, 8 Seiten, 2018
[DOI: 10.1051/matecconf/201816514014]

Gebhardt, Nils Christian
Chen, Geng
Bezold, Alexander
Broeckmann, Christoph

[Contribution to a conference proceedings, Journal Article]
Smart first wall materials for intrinsic safety of a fusion power plant
In: Fusion engineering and design, 136,B, 878-882, 2018
[DOI: 10.1016/j.fusengdes.2018.04.028]

Litnovsky, A.
Klein, F.
Schmitz, J.
Wegener, T.
Linsmeier, Ch.
et al.

[Journal Article]
Numerical Prediction of the Microstructure and Stress Evolution During Surface Grinding of AISI 52100 (DIN 100Cr6)
In: Integrating materials and manufacturing innovation, 7 (4), 202-213, 2018
[DOI: 10.1007/s40192-018-0122-y]

Rajaei, Ali
Hallstedt, Bengt
Broeckmann, Christoph
Barth, Sebastian
Trauth, Daniel
et al.

[Book, Proceedings]
Pulvermetallurgie - neue Herausforderungen und neue Wege : Vorträge und Ausstellerbeiträge des Hagener Symposiums am 29. und 30. November 2018 in Hagen
In: Pulvermetallurgie - Neue Herausforderungen und Wege Hagen 2018-11-29 - 2018-11-30, XIV, 438 Seiten : Illustrationen, 2018

Danninger, Herbert
Sigl, Lorenz
Broeckmann, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steels
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Saewe, Jasmin
Gayer, Christoph
Jauer, Lucas
Kunz, Johannes
Broeckmann, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
FEM-Simulation der Wärmebehandlung von PM-Bauteilen am Beispiel des Einsatzhärtens randschichtverdichteter PM-Zahnräder
In: Pulvermetallurgie - neue Herausforderungen und neue Wege : Vorträge und Ausstellerbeiträge des Hagener Symposiums am 29. und 30. November 2018 in Hagen / veranstaltet vom Ausschuss für Pulvermetallurgie, Deutsche Gesellschaft für Materialkunde (DGM), Deutsche Keramische Gesellschaft (DKG), Fachverband Pulvermetallurgie (FPM), Verein Deutscher Ingenieure - Gesellschaft Materials Engineering (VDI-GME), Stahlinstitut VDEh; Fachverband Pulvermetallurgie ; Herausgeber: Herbert Danninger, Lorenz Sigl, Christoph Broeckmann, 69-80, 2018

Rajaei, Ali
Frech, Tim
Scholzen, Philipp
Hallstedt, Bengt
Löpenhaus, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
Fe simulation of case hardening surface densified PM gear wheels
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Rajaei, Ali
Frech, Tim
Scholzen, Philipp
Hallstedt, Bengt
Löpenhaus, Christoph
et al.

[Book, Dissertation / PhD Thesis]
Calphad-based alloy design of multiphase high manganese steels with aluminium, xxii, 143 Seiten : Illustrationen, Diagramme, 2018

Tang, Florian

[Book, Dissertation / PhD Thesis]
Schadenstolerante Auslegung mit hochfestem Gusseisen EN-GJS-700-2, 1 Online-Ressource (XII, 195 Seiten) : Illustrationen, Diagramme, 2018

Heine, Luisa-Marie

[Journal Article]
Vibration Tests of 3D Printed Satellite Structure Made of Lattice Sandwich Panels
In: AIAA journal, 56 (10), 4213-4217, 2018
[DOI: 10.2514/1.J057241]

Zhang, Xiaoyu
Zhou, Hao
Shi, Wenhua
Zeng, Fuming
Zeng, Huizhong
et al.

[Journal Article]
Formation of white etching areas in SAE 52100 bearing steel under rolling contact fatigue : Influence of diffusible hydrogen
In: Wear : an international journal on the science and technology of friction, lubrication and wear, 414/415, 352-365, 2018
[DOI: 10.1016/j.wear.2018.08.022]

Oezel, M.
Schwedt, Alexander
Janitzky, T.
Kelley, R.
Bouchet-Marquis, C.
et al.

[Book, Dissertation / PhD Thesis]
Statistischer und technologischer Größeneinfluss auf die Schwingfestigkeit von Gusseisen mit Lamellengraphit, Seiten : Illustrationen, Diagramme, 2018

Buthmann, Sascha

[Book, Dissertation / PhD Thesis]
Entstehung von White Etching Areas und White Etching Cracks als Folge der Wälzbeanspruchung im Stahl 100Cr6, 1 Online-Ressource (xvii, 158 Seiten) : Illustrationen, 2018

Özel, Mehmet Ozan

[Journal Article]
Improved pseudo-ductile behavior of powder metallurgical tungsten short fiber-reinforced tungsten (Wf/W)
In: Nuclear materials and energy, 15, 214-219, 2018
[DOI: 10.1016/j.nme.2018.05.001]

Coenen, J. W.
Mao, Y.
Sistla, Sree Koundinya
Riesch, J.
Hoeschen, T.
et al.

[Contribution to a conference proceedings]
Influence of slip and electrical loading on the formation of White Etching Cracks on two- and four-disc test rigs
In: [Bearing World 2018], 2018

Cornel, Daniel
Jacobs, Georg
Gutierrez Guzman, Francisco Gerardo Antonio
Özel, Mehmet Ozan
Mikitisin, Adrian

[Contribution to a conference proceedings]
Investigation of the formation and morphology of White Etching Cracks using a two-disc test rig
In: [21st International Colloquium Tribology (TAE 2018)], 2018

Gutierrez Guzman, Francisco Gerardo Antonio
Jacobs, Georg
Özel, Mehmet Ozan
Burghardt, Gero
Broeckmann, Christoph
et al.

[Abstract, Contribution to a conference proceedings]
Formation of White Etching Cracks (WEC) under rolling loading in a two-disc test rig and a kinematic study on a full-scale bearing
In: STLE 2018 Extended Abstracts & Presentations : Minneapolis, May 20 - 24, 2018, 5 Seiten, 2018

Gutierrez Guzman, Francisco Gerardo Antonio
Mikitisin, Adrian
Cornel, Daniel
Sous, Christopher
Steinweg, Florian
et al.

[Journal Article]
Shakedown analysis for structural design applied to a manned airtight module
In: International journal of pressure vessels and piping, 162, 11-18, 2018
[DOI: 10.1016/j.ijpvp.2018.02.006]

Li, Weijie
Zeng, Fuming
Chen, Geng
Deng, Yuanbin
Liu, Guoqing
et al.

[Journal Article]
Influence of the interface strength on the mechanical properties of discontinuous tungsten fiber-reinforced tungsten composites produced by field assisted sintering technology
In: Composites / A, 107, 342-353, 2018
[DOI: 10.1016/j.compositesa.2018.01.022]

Mao, Y.
Coenen, J. W.
Riesch, J.
Sistla, Sree Koundinya
Almanstötter, J.
et al.

[Journal Article]
EBSD-based FEM simulation of residual stresses in a WC6wt.-%Co hardmetal
In: International journal of refractory metals & hard materials, 73, 139-145, 2017
[DOI: 10.1016/j.ijrmhm.2017.12.035]

Kayser, Wolfgang Andreas
Bezold, Alexander
Broeckmann, Christoph

[Journal Article]
Tooth-Root Load-Bearing Capacity of Fe-0.85 wt.% Mo Powder Metallurgical Gears
In: International journal of powder metallurgy, 54 (1), 33-46, 2018

Hajeck, Karl Marko
Frech, Tim
Beiss, Paul
Broeckmann, Christoph
Klocke, Fritz
et al.

[Journal Article]
A CALPHAD assessment of the Al-Mn-C system supported by ab initio calculations
In: Calphad, 60, 231-239, 2018
[DOI: 10.1016/j.calphad.2018.01.006]

Tang, Florian
Bogdanovski, Dimitri
Bajenova, Irina
Khvan, Alexandra
Dronskowski, Richard
et al.

[Journal Article]
Einfluss karbidbildender Elemente auf das Gefüge und die mechanischen Eigenschaften von hochsiliziumhaltigem Gusseisen mit Kugelgrafit
In: Giesserei / Special, 2018, 43-53, 2018

Riebisch, Moritz Fabian
Pustal, Björn
Bührig-Polaczek, Andreas
Hallstedt, Bengt

[Contribution to a book, Contribution to a conference proceedings]
Zähigkeitseigenschaften und Versagensverhalten hochfester Schraubenstähle
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 50. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 20. und 21. Februar 2018, Paderborn / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 69-79, 2018

Brinnel, Victoria
Sabotke, Björn
Wu, Bo
Lorenz, C.
Schilberg, Erimar
et al.

[Journal Article]
Long crack growth and crack closure in high strength nodular cast iron
In: Engineering fracture mechanics, 192, 24-53, 2018
[DOI: 10.1016/j.engfracmech.2018.02.003]

Heine, Luisa-Marie
Bezold, Alexander
Broeckmann, Christoph

[Contribution to a book, Journal Article]
Influence of Slip and Lubrication Regime on the Formation of White Etching Cracks on a Two-Disc Test Rig
In: Lubricants, 6 (1), 8, 2018
[DOI: 10.3390/lubricants6010008]

Gutierrez Guzman, Francisco Gerardo Antonio
Özel, Mehmet Ozan
Jacobs, Georg
Burghardt, Gero
Broeckmann, Christoph
et al.

[Journal Article]
Influence of the size and boundary conditions on the predicted effective strengths of particulate reinforced metal matrix composites (PRMMCs)
In: Composite structures, 189, 330-339, 2018
[DOI: 10.1016/j.compstruct.2018.01.005]

Chen, Geng
Bezold, Alexander
Broeckmann, Christoph

[Book, Dissertation / PhD Thesis]
Zahnfußtragfähigkeit pulvermetallurgisch hergestellter Zahnräder, 1 Online-Ressource (XIII, 211 Seiten) : Illustrationen, Diagramme, 2018

Hajeck, Karl Marko

[Journal Article]
Experimental investigation of solidification and isothermal sections at 1000 and 1100 °C in the Al-Fe-Mn-C system with special attention to the kappa-phase
In: Journal of alloys and compounds : JAL, 735, 1211-1218, 2017
[DOI: 10.1016/j.jallcom.2017.11.288]

Fartushna, I.
Bajenova, I.
Khvan, A.
Cheverikin, V.
Ivanov, D.
et al.

[Journal Article]
High-temperature oxidation and compressive strength of Cr2AlC MAX phase foams with controlled porosity
In: Journal of the American Ceramic Society, 101 (2), 542-552, 2017
[DOI: 10.1111/jace.15224]

Gonzalez-Julian, Jesus
Onrubia, Sara
Bram, Martin
Broeckmann, Christoph
Vassen, Robert
et al.

[Book]
[Kalender]
In: [Kalender] ... / IWM, Institut für Werkstoffanwendungen im Maschinenbau, RWTH Aachen University; IAPK, Institut für Anwendungstechnik Pulvermetallurgie und Keramik an der RWTH Aachen e.V., 2018, 13 Blätter, 2017

 

[Book]
Risse auf Lagerringen : Gefügeveränderungen in Wälzlagerringen mit Rissen als Folgeschäden : Abschlussbericht ; Forschungsvorhaben Nr. 707 II, VI, 258 Seiten : Illustrationen, Diagramme, 2017

Gutierrez Guzman, Francisco Gerardo Antonio
Özel, Mehmet Ozan
Pinar, Philippe
Burghardt, Gero
Janitzky, Thomas L. M.
et al.