[Fachzeitschriftenartikel]
Numerical analysis of droplet breakup, cooling, and solidification during gas atomisation
In: Powder metallurgy, 66, 1-16, 2023
[DOI: 10.1080/00325899.2023.2213002]

Wang, Gezhou
Deng, Yuanbin (Corresponding author)
Adjei-Kyeremeh, Frank
Zhang, Jiali
Raffeis, Iris
et al.

[Fachzeitschriftenartikel]
Diffusion Barriers Minimizing the Strength Degradation of Reactive Air Brazed Ba0.5Sr0.5Co0.8Fe0.2O3-δ Membranes during Aging
In: Membranes, 13 (5), 504, 2023
[DOI: 10.3390/membranes13050504]

Herzog, Simone
Kaletsch, Anke
Broeckmann, Christoph

[Fachzeitschriftenartikel]
Electric Current‐Assisted Sintering of 8YSZ: A Comparative Study of Ultrafast High‐Temperature Sintering and Flash Sintering
In: Advanced engineering materials, 2300145, 2023
[DOI: 10.1002/adem.202300145]

Wang, Shufan (Corresponding author)
Mishra, Tarini Prasad
Deng, Yuanbin
Balice, Luca
Kaletsch, Anke
et al.

[Beitrag zu einem Tagungsband]
An Interdisciplinary Approach to Local Strength Assessment of Cast Iron Components to Exploit Unused Component Potential
In: [2nd Congress for Intelligent Combining of Design, Casting, Computer Simulation, Checking and Cyclic Behaviour for Efficient Cast Components, InCeight2023, 2023-03-06 - 2023-03-08, Darmstadt, Germany], 2023
[DOI: 10.24406/PUBLICA-1036]

Weber, Felix
Züch, Vitali
Gebhardt, Nils Christian
Bezold, Alexander
Broeckmann, Christoph
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Multi-domain optimization of cast iron components in wind turbines
In: Forschung im Ingenieurwesen = Engineering research, 87 (1), 39-50, 2023
[DOI: 10.1007/s10010-023-00616-3]

Weber, Felix Martin (Corresponding author)
Broeckmann, Christoph
Züch, Vitali
Jacobs, Georg
Zimmermann, Jannik
et al.

[Fachzeitschriftenartikel]
Experimental and Numerical Studies of Densification and Grain Growth of 8YSZ during Flash Sintering
In: Advanced engineering materials, 2201744, 2023
[DOI: 10.1002/adem.202201744]

Wang, Shufan (Corresponding author)
Mishra, Tarini Prasad
Deng, Yuanbin
Kaletsch, Anke
Bram, Martin
et al.

[Fachzeitschriftenartikel]
Influence of additive-derived reaction layers on white etching crack failure of SAE 52100 bearing steel under rolling contact loading
In: Tribology international, 180, 108239, 2023
[DOI: 10.1016/j.triboint.2023.108239]

Steinweg, Florian (Corresponding author)
Mikitisin, Adrian
Janitzky, Thomas L. M.
Richter, Silvia
Weirich, Thomas E.
et al.

[Fachzeitschriftenartikel]
Influence of heat treatment and densification on the load capacity of sintered gears
In: Powder metallurgy, 66 (2), 86-93, 2022
[DOI: 10.1080/00325899.2022.2138171]

Scholzen, Philipp Alexander (Corresponding author)
Rajaei Harandi, Ali (Corresponding author)
Brimmers, Jens
Hallstedt, Bengt (Corresponding author)
Bergs, Thomas
et al.

[Fachzeitschriftenartikel]
Influence of Preheating Temperature on Microstructure Evolution and Hardness of High-Speed Steel AISI M50 Processed by Laser Powder Bed Fusion
In: Steel research international, 1-12, 2023
[DOI: 10.1002/srin.202200784]

Qin, Siyuan (Corresponding author)
Saewe, Jasmin
Kunz, Johannes
Herzog, Simone
Kaletsch, Anke
et al.

[Fachzeitschriftenartikel]
Laves phases in Mg-Al-Ca alloys and their effect on mechanical properties
In: Materials and design, 225, 111470, 2022
[DOI: 10.1016/j.matdes.2022.111470]

Zubair, Muhammad (Corresponding author)
Felten, Markus
Hallstedt, Bengt (Corresponding author)
Vega Paredes, Miquel
Abdellaoui, Lamya
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Influence of post heat treatment on microstructure and fracture strength of cemented carbides manufactured using laser-based additive manufacturing
In: International journal of refractory metals & hard materials, 111, 106085, 2022
[DOI: 10.1016/j.ijrmhm.2022.106085]

Fries, Sofia (Corresponding author)
Vogelpoth, Andreas
Kaletsch, Anke
Broeckmann, Christoph

[Fachzeitschriftenartikel]
Multiscale modelling and simulation of subsurface carbide deformation during the formation of white etching areas
In: Wear : an international journal on the science and technology of friction, lubrication and wear, 512/513, 204542, 2022
[DOI: 10.1016/j.wear.2022.204542]

Peela, Agastya (Corresponding author)
Spille, Joshua
Steinweg, Florian
Janitzky, Thomas L. M.
Schwedt, Alexander
et al.

[Fachzeitschriftenartikel]
Microscale fatigue mechanisms in high silicon alloyed nodular cast iron
In: International journal of fatigue, 168, 107402, 2022
[DOI: 10.1016/j.ijfatigue.2022.107402]

Gebhardt, Nils Christian (Corresponding author)
Zhang, Jiali
Bezold, Alexander
Broeckmann, Christoph

[Buchbeitrag, Fachzeitschriftenartikel]
Influences of Manufacturing-Related Microstructural Variations on Fatigue in Carbide-Rich Tool Steels
In: Steel research international, 94 (4), 2200578, 2022
[DOI: 10.1002/srin.202200578]

Scholl, Lennart Mirko (Corresponding author)
Bezold, Alexander
Broeckmann, Christoph

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Improving the Fatigue Strength of Laser Powder Bed-Fused AISI M3:2 by Hot Isostatic Pressing
In: Steel research international, 94 (4), 2200435, 2022
[DOI: 10.1002/srin.202200435]

Qin, Siyuan (First author)
Herzog, Simone
Kaletsch, Anke
Broeckmann, Christoph

[Dataset]
Rohdaten, ergänzende Berechnungen und Informationen aus der vorgelegten Dissertation von Simone Herzog, 2023
[DOI: 10.18154/RWTH-2022-06816]

Herzog, Simone (First author)
Liu, Chao

[Fachzeitschriftenartikel]
Microstructural influences caused by different aging strategies on the strain-dependent damping of the high-strength aluminum alloy aa7075
In: Metals : open access journal, 12 (12), 2172, 2022
[DOI: 10.3390/met12122172]

Lotz, Steffen (Corresponding author)
Zhang, Jiali
Scharifi, Emad
Morak, Roland
Weidig, Ursula
et al.

[Buch, Doktorarbeit]
Festigkeit keramischer sauerstoffionenleitender Membranen und deren reaktivgelöteter Verbunde, 2022
[DOI: 10.18154/RWTH-2023-00770]

Herzog, Simone

[Fachzeitschriftenartikel]
Low carbon bainitic steel processed by ausforming : Heterogeneous microstructure and mechanical properties
In: Materials characterization, 194, 112466, 2022
[DOI: 10.1016/j.matchar.2022.112466]

Kumnorkaew, Theerawat (Corresponding author)
Lian, Junhe
Uthaisangsuk, Vitoon
Zhang, Jiali
Bleck, Wolfgang

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Powder Metallurgy Produced Aligned Long Tungsten Fiber Reinforced Tungsten Composites
In: Journal of nuclear engineering, 3 (4), 446-452, 2022
[DOI: 10.3390/jne3040030]

Mao, Yiran
Coenen, Jan W. (Corresponding author)
Liu, Chao
Terra, Alexis
Tan, Xiaoyue
et al.

[Buch, Doktorarbeit]
Wasserbasiertes Pulveraufbereiten und Reaktionssintern zur Synthese transparenter Spinellkeramik
In: Werkstoffanwendungen im Maschinenbau 24, 2022

Schreiner, Tino

[Fachzeitschriftenartikel]
Thermodynamics, microstructure evolution and mechanical properties of Al- and C-added CoFeMnNi multi-principal element alloys
In: Materials and design, 224, 111368, 2022
[DOI: 10.1016/j.matdes.2022.111368]

Kies, Fabian Martin (Corresponding author)
Noori, Mehdi
Ewald, Simon
Schleifenbaum, Johannes Henrich
Hallstedt, Bengt
et al.

[Fachzeitschriftenartikel]
Interface and mechanical properties of the single-layer long fiber reinforced Wf/W composites fabricated via field assisted sintering technology
In: Materials science and engineering / A, 857, 144098, 2022
[DOI: 10.1016/j.msea.2022.144098]

Shu, Rui
Mao, Yiran (Corresponding author)
Coenen, Jan W.
Terra, Alexis
Liu, Chao
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Resistance against Abrasive Wear and Corrosion of Laser Powder Bed Alloyed High Chromium Tool Steels
In: Steel research international, 94 (4), 2200455, 2022
[DOI: 10.1002/srin.202200455]

Köhler, Marie Luise (Corresponding author)
Radtke, Felix
Norda, Michael
Herzog, Simone
Kaletsch, Anke
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Forming of Additively Manufactured Ceramics by Magnetic Fields
In: Ceramics, 5 (4), 947-960, 2022
[DOI: 10.3390/ceramics5040068]

Klug, Christina (Corresponding author)
Herzog, Simone (Corresponding author)
Kaletsch, Anke
Broeckmann, Christoph
Schmitz, Thomas Heinrich

[Buchbeitrag, Fachzeitschriftenartikel]
Failure Mechanisms of Ba0.5Sr0.5Co0.8Fe0.2O3−δ Membranes after Pilot Module Operation
In: Membranes, 12 (11), 1093, 2022
[DOI: 10.3390/membranes12111093]

Herzog, Simone (Corresponding author)
Liu, Chao
Nauels, Nicolas
Kaletsch, Anke
Broeckmann, Christoph

[Buchbeitrag, Fachzeitschriftenartikel]
Influence of Process Parameters on Porosity and Hot Cracking of AISI H13 Fabricated by Laser Powder Bed Fusion
In: Powders, 1 (3), 184-193, 2022
[DOI: 10.3390/powders1030012]

Qin, Siyuan (Corresponding author)
Bo, Yutao
Herzog, Simone
Hallstedt, Bengt
Kaletsch, Anke
et al.

[Fachzeitschriftenartikel]
Reduced strength degradation of reactive air brazed Ba0.5Sr0.5Co0.8Fe0.2O3-δ membranes by pre-oxidation of metallic components
In: Materials science and engineering / A, 857, 143993, 2022
[DOI: 10.1016/j.msea.2022.143993]

Herzog, Simone (Corresponding author)
Kaletsch, Anke
Broeckmann, Christoph

[Fachzeitschriftenartikel]
Demonstrating tungsten fiber-reinforced porous-matrix tungsten composites for future fusion application
In: Nuclear fusion : NF, 62 (10), 106029, 2022
[DOI: 10.1088/1741-4326/ac8c55]

Mao, Yiran
Coenen, Jan W.
Terra, Alexis
Gao, Liang (Corresponding author)
Kreter, Arkadi
et al.

[Fachzeitschriftenartikel]
Investigation on the Curvature and Stress Distribution of Laminates Based on an Analytic Solution and FE Simulation
In: Materials, 15 (18), 6458, 2022
[DOI: 10.3390/ma15186458]

Liu, Chao (Corresponding author)
Günther, Anne
Deng, Yuanbin
Kaletsch, Anke
Herrmann, Mathias
et al.

[Bericht]
FVA 707 VII - WEC: Wärmebehandlung und Werkstoffe Gegenmaßnahmen, 2022

Habermehl, Christian
Steinweg, Florian
Mikitisin, Adrian
Gutierrez Guzman, Francisco Gerardo Antonio
Janitzky, Thomas L. M.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Formation of White Etching Crack under sliding, boundary lubrication and additional current passage using modern lubricant compositions
In: 23rd International Colloquium Tribology : industrial and automotive lubrication : conference proceedings 2022 / published by Ksenija Topolovec-Miklozic, Andreas Pauschitz, Arshia Fatemi ; TAE - Technische Akademie Esslingen, 67-70, 2022

Cornel, Daniel
Steinweg, Florian
Gutierrez Guzman, Francisco Gerardo Antonio
Jacobs, Georg
Mikitisin, Ardrian

[Fachzeitschriftenartikel]
Formation of White Etching Cracks under electrical current flow - Influence of load, slip and polarity
In: Wear : an international journal on the science and technology of friction, lubrication and wear, 504/505, 204394, 2022
[DOI: 10.1016/j.wear.2022.204394]

Steinweg, Florian (Corresponding author)
Mikitisin, A.
Özel, Mehmet Ozan
Schwedt, Alexander
Janitzky, Thomas L. M.
et al.

[Fachzeitschriftenartikel]
Microstructure coarsening in Ba0.5Sr0.5Co0.8Fe0.2O3-δ during reactive air brazing
In: Journal of the European Ceramic Society, 42 (13), 5842-5850, 2022
[DOI: 10.1016/j.jeurceramsoc.2022.06.084]

Herzog, Simone (Corresponding author)
Boussinot, Guillaume
Kaletsch, Anke
Apel, Markus
Broeckmann, Christoph

[Fachzeitschriftenartikel]
Effect of highly loaded volume on the fully reversed fatigue strength of heat-treated Fe-Cu-C steels
In: International journal of powder metallurgy, 58 (2), 33-41, 2022

Beiss, Paul (Corresponding author)
Burkamp, Karl
Broeckmann, Christoph

[Buch, Doktorarbeit]
Einfluss der Graphitmorphologie auf die Langzeitfestigkeit von Gusseisen mit Kugelgraphit
In: Werkstoffanwendungen im Maschinenbau 23, 2022

Gebhardt, Nils Christian

[Fachzeitschriftenartikel]
Martensite Transformation in Tool Steels under Isostatic Pressure : Implementation of In-Situ Electrical Resistivity Measurements into a Hot Isostatic Press with Rapid Quenching Technology
In: Metals : open access journal, 12 (5), 708, 2022
[DOI: 10.3390/met12050708]

Kramer, Berenice
Deng, Yuanbin
Lentz, Jonathan
Broeckmann, Christoph
Theisen, Werner
et al.

[Beitrag zu einem Tagungsband]
Effect of Thermal Post-Treatment on Microstructure of Additively Manufactured Cemented Carbides
In: [The 20th Plansee Seminar: International Conference on Refractory Metals and Hard Materials, 2022-05-29 - 2022-06-03, Reutte, Austria], 2022

Fries, Sofia
Vogelpoth, Andreas
Kaletsch, Anke
Weisheit, Andreas
Broeckmann, Christoph

[Fachzeitschriftenartikel]
Mechanical properties of heterogeneous, porous LiFePO4 cathodes obtained using statistical nanoindentation and micromechanical simulations
In: Journal of power sources, 539, 231565, 2022
[DOI: 10.1016/j.jpowsour.2022.231565]

Sedlatschek, Tobias (Corresponding author)
Krämer, Mathias
Gibson, James Samuel Kwok-Leon
Korte-Kerzel, Sandra
Bezold, Alexander
et al.

[Abstract, Beitrag zu einem Tagungsband]
Improving fatigue strength of laser powder bed fused AISI M3:2 by hot isostatic pressing
In: 12th Tooling Conference &Exhibition - Tooling 2022 : Book of Abstracts. - Monday 25 April 2022 - Wednesday 27 April 2022, Conventum Conference Center, 16, 7-7, 2022

Qin, Siyuan (Corresponding author)
Herzog, Simone
Kaletsch, Anke
Broeckmann, Christoph

[Fachzeitschriftenartikel]
Influence of laser surface texturing on the flexural strength of Al2O3 and Si3N4
In: Journal of the European Ceramic Society, 04 (10), 4286-4295, 2022
[DOI: 10.1016/j.jeurceramsoc.2022.04.013]

Liu, Chao (Corresponding author)
Herzog, Simone
Deng, Yuanbin
Kaletsch, Anke
Oster, Philip
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Influence of the L-PBF Process Atmosphere on the Microstructure and Tensile Properties of AISI 318LN Duplex Stainless Steel
In: Journal of manufacturing and materials processing, 6 (2), 32, 2022
[DOI: 10.3390/jmmp6020032]

Mirz, Markus (Corresponding author)
Herzog, Simone
Broeckmann, Christoph
Kaletsch, Anke

[Abstract, Beitrag zu einem Tagungsband]
Resistance Against Abrasive Wear and Corrosion of a Laser Powder Bed Alloyed High Chromium Tool Steel
In: 12th Tooling Conference & Exhibition - Tooling 2022 : Book of Abstracts. - Monday 25 April 2022 - Wednesday 27 April 2022, Conventum Conference Center, 15-16, 2022

Köhler, Marie Luise (Corresponding author)
Radtke, Felix
Herzog, Simone
Kaletsch, Anke
Broeckmann, Christoph

[Fachzeitschriftenartikel]
Ultra-fast high-temperature sintering of strontium titanate
In: Acta materialia, 231, 117918, 2022
[DOI: 10.1016/j.actamat.2022.117918]

Mishra, Tarini Prasad (Corresponding author)
Wang, Shufan
Lenser, Christian
Jennings, Dylan
Kindelmann, Moritz
et al.

[Fachzeitschriftenartikel]
A high-throughput strategy for rapid synthesis and characterization of Ni-based superalloys
In: Rare metals, 41 (8), 2693-2700, 2022
[DOI: 10.1007/s12598-022-01965-8]

Zhao, Lei
Liu, Su-Ran
Jiang, Liang
Yang, Li-Xia
Zhu, Li-Long (Corresponding author)
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
PBF-EB of Fe-Cr-V Alloy for Wear Applications
In: Materials, 15 (5), 1679, 2022
[DOI: 10.3390/ma15051679]

Franke-Jurisch, Marie (Corresponding author)
Mirz, Markus
Wenz, Thomas
Kirchner, Alexander
Klöden, Burghardt
et al.

[Buch, Doktorarbeit]
Legierungsentwicklung für die laserbasierte additive Fertigung von hochlegierten kohlenstoffreichen Stählen
In: Werkstoffanwendungen im Maschinenbau Band 22, 2022

Kunz, Johannes

[Fachzeitschriftenartikel]
Influence of carbon content on fatigue strength of cemented carbides
In: International journal of refractory metals & hard materials, 105, 105823, 2022
[DOI: 10.1016/j.ijrmhm.2022.105823]

Fries, Sofia (Corresponding author)
Burkamp, Karl
Broeckmann, Christoph
Richter, Silvia
Westermann, Heinz
et al.

[Fachzeitschriftenartikel]
Understanding influence of micro pores on strengths of LMDed AlSi10Mg material using a direct method based statistical multiscale framework
In: Materials and design, 214, 110409, 2022
[DOI: 10.1016/j.matdes.2022.110409]

Xin, Shengzhen
Zhang, Lele
Chen, Min
Gebhardt, Nils Christian
Chen, Geng (Corresponding author)

[Fachzeitschriftenartikel]
Synergistic Extraction and Separation of Cobalt and Lithium Using D2EHPA and CYANEX 272
In: Mining, metallurgy & exploration, 32, 777-792, 2022
[DOI: 10.1007/s42461-021-00531-7]

Mahmoudi, Sarah
Babakhani, Ataollah
Noori, Mehdi
Azizitorghabeh, Atefeh
Rashchi, Fereshteh (Corresponding author)